To simplify the process of designing and producing interior design, Thudio has prepared Modular 3D that can be used in Sketch-up. Here is a Tutorial and a basic explanation of how to use Modular 3D by Thudio
A. What is Modular 3D
Modular 3D is a customizable 3D that you can stretch to the size and specification you desire with some clicks.
notes:
You are prohibited to explode the 3D modular. Exploding causes errors and breaks the 3D.
B. How to Use Modular 3D
1. Put Item into Your Design
|
2. Change Configuration from Inspector
I. Edit with Inspector
A. Dimension B. Configuration |
II. List Options
First, you need to open the "Inspector" or icon by clicking it and then click the item you want to change, and options will appear in the inspector.
Each cabinet unit may have different options depending on the cabinet type. Here is the option you can access:
A. Opening System
Opening System: 1. Finger groove: For instant finger grooved cabinet 2. Handle: Plain door, then you can pick handle from thudio library For the handle collection go to Loose > Hardware & accessories > Accessories |
B. Show Hide Door
Show Hide Door: 1. Show: The door will be shown 2. Hide: Door will disappear from the cabinet. you can use this to insert accessories and shelves. This is also a presentation tool to show the client the inside of the cabinet |
C. Body Configuration
Body Configuration: 1. Standard: Full top panel of the cabinet 2. Sink/Hob: Hole at the top of the cabinet suitable for sink or hob installation |
D. Plinth/ No Plinth
Plinth/ No Plinth: 1. Plinth: For an instant 8cm plinth choose this option 2. No Plinth: For custom, chooses no plinth and make your own plinth. you can also use this for the LPG cabinet *ps. Always feel free to combine the manual 3D workflow with this. |
E. Drawer Amount
Drawer Amount: Adjust how many drawers you want in your cabinet. You can choose between 1-5 drawers. |
F. Cabinet Depth for Corner Cabinet
Cabinet Depth: Only for corner cabinets, you need two steps to adjust the size:
|
G. Fill in the Size
Fill in : 1. Shelf Height: To adjust the height of the fridge shelf 2. Dispenser Cut Out Lenght & Height: To adjust the access hole to the dispenser |
H. Shelf Quantity
Shelf Quantity: Adjust how many shelves you want for your open shelf cabinet by filling in the number you desired |
3. Change Item Size with Scale Feature
There are 2 ways to change item size that will be :
A. Option 1 - stretch only
|
B. Option 2 - Stretch Input Exact Amount + unit (cm/mm)
|
4. Apply Finishing
*ps. The material is already set with the common direction you don't need to change it manually |
5. Combine with manual workflow
This modular here is not to replace all your existing workflow, you can always combine the modular with manual making 3D too like customizing plinth height and also making the countertop of the kitchen set